Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • techsupport@clfd.net
8
FieldSmart
®
Fiber Entrance Cabinet (FEC)
Installation Manual
_________________________________________________________
Manual 019612 REV B - Aug 2018
An example of a splice tray utilizing the splice
chips to secure 24 loose tube splice sleeves is
shown here.
Wrap a layer of grommet tape around the buffer
tubes and secure into place in the splice tray
using the tie-down holes and cable ties.
Provided with the splice tray are 3 ribbon tie-downs which utilize a split grommet and retention cover which will allow the
ribbon to be secured into the tray even in mid-span/ring cut applications.
Slip the split rubber grommet onto the ribbon, followed by the plastic retention cover over the opposite side.
Note:
Extra ribbon tie-downs are available in a kit, which can be ordered separately (P/N 019501).
After protecting the ribbon fiber with the ribbon
tie-down, secure it into the tray.
The splice tray features tie-down holes on each
side of the tray, which will allow for 5 ribbon tie-
downs per side, as well as one ribbon tie down on
each side in the additional holding location.
Additional Holding
Location
Standard
Tie-Down
