background image

When using your iron, basic safety precautions 
should always be followed including the 
following:-

                                                   

1. Read all the instructions.

2. Use the iron only for its intended use.

3. To protect against the risk of electric 

shock do not put the appliance in water 

or in any other liquid.

4. Close supervision is necessary when any 

appliance is used near children.

NEVER ALLOW A CHILD TO USE THIS 
PRODUCT

5. The iron should always be put off by turning 

the temperature control dial to “MIN” before 
plugging or unplugging from the socket. 
Never yank the cord to disconnect from the 
socket, instead grasp plug and pull to 
disconnect.

6. Do not allow cord to touch hot surfaces. Let 

iron cool completely before putting away. 
Loop cord loosely around the iron before 
storing.

7. Always disconnect the iron from the 

electrical socket when filling the water or 
emptying and when not in use. 

8. Do not use outdoors. 

9. Do not operate the iron with a damaged 

cord or if the iron has been dropped or 
damaged. To avoid the risk of electric shock, 
do not disassemble the iron but contact 
customer care for advice. Incorrect 
reassembly can cause a risk of electric 
shock when the iron is used. 

10.Do not leave the iron unattended whilst 

plugged in or on an ironing board. Never 
allow the mains lead to over-hang the    
work surface.

11.Burns can occur from touching hot metal 

part, hot water or steam. Use caution when 
you turn the steam iron upside down there 
may be hot water in the water tank. 

1. If iron does not work, check the         

following points;

Has the temperature been set to the 
required temperature? Is the plug in its 
socket? Is the plug itself or the socket faulty? 
(Check by plugging in another appliance)

2. Warning: when not in use, your iron should 

never be placed flat and left on the ironing 
board.

3. To prevent damage to textile being ironed, 

follow the temperature guide carefully (test 
the inside of the hem of the garment)

4. When ironing is complete, remove the plug 

from the socket, empty any remaining water 
from the tank and allow to cool before 
storage.

5. If you drop or severely knock your iron this 

could cause internal damage even if the 
outside appear alright. Have it checked by 
authorised Service Centre. 

6. It is recommended that you use up one 

beaker of water by operating your iron’s 
steam and shot of steam functions before 
ironing any clothes as some dripping may 
occur while your iron steam system is 
activated.

IMPORTANT SAFEGUARDS 

Special instructions

Save these instructions

2

Summary of Contents for Jet Lite









Reviews: