8)
Plumb the Door and remaining Wall Receiver. Through the oversize holes in the Door jamb
drill through the Wall Receiver frame and into the wall stud using a 3.0 mm drill bit
9)
Secure the Wall Receiver to the wall using
the No.6x 38mm stainless steel screws.
10) Cap
t
he oversize holes in the door Jamb using the
9mm plas c plugs
13
)
From the inside using a 3.0mm drill bit; drill through the ver cal sec ons of the Door into the Wall
Receivers. Fix the Door to the Wall Receivers. You must have a minimum of 10mm overlay and the
holes must be drilled no less than 5mm from the edge of the ver cal aluminium sec ons. Secure in
place using the 6 gauge x 10mm screws.
Secure the Door Set (All Screw fixings are made from the Inside)
