Spa Bath Installation and Operation Instructions
Dear Purchaser/Installer
Thank you for purchasing a Clearlite Bathrooms product. We are proud to be 100% NZ owned and operated
with over 30 years experience in the bathroomware industry. We hope you enjoy your Clearlite Bathrooms
experience.
The unit that you have purchased
has been designed and manufactured to the highest possible standards.
Please read and ensure that you fully understand the installation instructions and how they apply to your unit.
Bear in mind that useful old adage - “measure twice and cut once”.
Please note that prior to wrapping this product it was cleaned and polished under bright lights.
For your own peace of mind please unwrap and check the product carefully on receipt. This is a precaution to
ensure that the product has not been damaged by handling or transport. No claim will be recognised
regarding face damage to the product anytime after installation.
Whilst we at Clearlite Bathrooms take great pride in producing what we consider the best products available,
we cannot accept responsibility for damage that may occur in handling or installation.
Important Note
All Clearlite Bathrooms Spa Baths are supplied with a self-supporting wooden
frame for easy installation and have been extensively factory water tested prior
to dispatch. Please check the screw connections of the pipe work (as indicated
on the product) as these can sometimes work loose during transportation.
All Clearlite Bathrooms Spa Baths are manufactured to the highest standard and
are designed to provide maximum therapeutic benefits. As a standard feature
Clearlite Bathrooms Spa Baths are fitted with a heated pump. The heating can be
manually controlled from the safety and comfort of the bath, its function is to
maintain the water temperature, removing the need to add hot water whilst
bathing. It is not designed to heat water from cold.
Installer - Please make the “Operating Guide” section of this
document available to the Homeowner
