5. Determine which side the Door is to be hinged
ensuring that the door opens outwards. Li the
Door onto the tray and fully insert one side into
a Wall Receiver.
6. Expand the Door out so it fully engages into the
opposite Wall Receiver. Check that the Door
Jambs are plumb
Securing the Door Set
7. From the inside of the shower fix the Door to the
Wall Receivers by drilling three 3mm holes down
the Wall Receivers (top, bo om and centre). Drill
through the Wall Receivers into the Door Jamb
profiles.
8.
Secure in place using No.6 x 10mm stainless steel
screws. Cover the screw heads with the cover caps
.
Repeat for opposite side.
