I
nstallatIon
and
o
peratIon
M
anual
10
Enter
13.
M
to Modify.
You are prompted for the root password for the NS-MNE device.
Enter
14.
“sysadm”
(the field is case sensitive).
You are prompted to enter your IP settings.
15.
Enter the Static IP Address and press
16.
enter
.
Note: If you have more than one NS-MNE to configure the IP addresses must be
»
sequential. For instance, the first NS-MNE might be 10.15.100.150, and the next two
would be 10.15.100.151 and 10.15.100.152.
You are prompted to enter the Subnet mask.
Enter the Subnet Mask and press
17.
enter
.
You are prompted to enter the Gateway Address.
18.
Enter the Gateway address and press
19.
enter
.
You are prompted to change or accept other settings. Accept the defaults.
20.
Accept the changes and the values are saved in NV (Non-Volatile) memory completing the
21.
configuration.
The unit reboots. When it has rebooted you will see the new IP, Subnet Mask, and Gateway
22.
settings displayed on the HyperTerminal.
Note: Do not make any changes to your computer or any hardware connected to the
»
system until the NS-MNE completely reboots.