4
Furniture Service Department: 800.283.5936
3.
Securely anchor the plasma Static Mount (not supplied) to the Vertical Support using
four 5/16 Bolts, four 5/16 Washers and four 5/16 Nuts.
»
NOTE: The Static Mount can be attached higher or lower on the Vertical Support
depending on desired position and size of plasma screen.
4. Using hardware supplied with the Mounting Bracket, attach bracket to the back of the
plasma screen. (See Mounting Bracket instructions for more information.)
»
NOTE: Wood Plasma Carts require one Chief PST-XXXX plasma mount (not supplied)
for each plasma screen being secured to the support.
FIGURE 2.2
Static Mount Installation
