Step 6:
Secure a foot to the end of each of leg using a base foot nut and bolt.
Step 7:
Lift one side of the roof and slide in the leg poles. Then lift the other side and insert the
remaining leg poles.
Step 8:
Working inside/under the canopy, secure the cover to the frame using ball bungies. Note
that your bungies may be a different color than those shown. Start in the corners.
Step 9:
Once the corners are fastened, place ball bungies through all the grommet holes and loop
around the pipe as illustrated above.
Step 10:
Anchor your shelter using an approved anchoring method. While anchors are not supplied
in your kit, the type appropriate for your installation may be purchased from ClearSpan
TM
. Call
us at 1-
800-245-9881
if you need advice from one of our shelter experts prior to purchase.
Page 6