CLEARSPAN
™
VALUE LINE
18
Revision date: 03.10.08
Thread the strap ends into the ratchet and slightly
tighten.
8.
ATTACH MAIN COVER (CONTINUED)
NOTE:
It may be necessary to remove excess strap if it
binds up in the ratchet.
Repeat the steps for the remaining ratchets.
Using additional help (if needed) tighten the main cover
beginning with the ratchets along the side of the shelter
frame.
After the side ratchets are tightened, return to the end
wall ratchets and tighten the bonnet straps of the main
cover.
NOTE:
Loosen the ratchets if needed to remove
excess strap and retighten. Loosen all ratchets if
needed to reposition the main cover on the frame and
retighten the ratchets.
Fold the skirt of main cover down and over the ratchets
to complete the installation of the main cover.
9.
10.
11.
12.
SHELTER CARE AND MAINTENANCE
Proper care and maintenance of your shelter is important.
Check the following items periodically to properly maintain
your shelter:
Regularly check the main cover and panels (if
equipped) to see that these remain tight and in proper
repair.
Check connections and all fasteners to verify that they
remain tight.
Do not climb or stand on the shelter at anytime.
Remove debris and objects that may accumulate on
the shelter. Use tools that will not damage the cover
when removing debris.
Remove snow to prevent excess accumulation. Use
tools that will not damage the cover when removing
snow.
Check the contents of the shelter to verify that
nothing is touching the cover or the side panels that
could cause damage.
Check the anchoring system to ensure that all
components are tight and in good repair.
If the shelter is moved, inspect all parts and
connections before reassembling.
For replacement or missing parts, call 1-800-245-9881
for assistance.
NOTE:
With the exception of Truss Arch buildings,
ClearSpan™ shelters and greenhouses
do not
have any
tested loading criteria.
•
•
•
•
•
•
•
•
•
