3
Visit www.ClearSpan.com for additional products and customer assistance.
Take one " plain pipe and twist it onto one of the attached eyebolts.
3.
ATTACH EYEBOLT ASSEMBLIES (CONTINUED)
Photo may show a slightly different
application.
Pipe with
installed
star nut.
NOTE: Hand-tighten the pipe until it is snug. Secure shelter material tightly between the washers.
Repeat the steps and attach the remaining frame support pipes.
With all supports attached to the storage bag (or shelter), place the frame pipes in position as shown in the
following photos and anchor the pipes in place using the anchor kits.
4.
5.
Consult the anchor kit installation information to properly attach and secure the anchor kit.
ATTENTION: Each Anchor Kit (#03599) contains four (4) individual anchor sets. Depending on the length of
your shelter, you may have anchor sets (ground stakes and ratchet/straps) that are not used.
6.
Place the lower part of each frame support
on the storage bag to keep the bag in
position.
Dashed lines show the positions of the end
frame support pipes.
Assembled Frame Support Pipe
