Visit www.ClearSpan.com for additional products and customer assistance.
4
Anchor Kit 03599
Installation Instructions
This anchor kit is not designed for larger shelters or for use in sand or on hard surfaces such as asphalt or
concrete. Installing ground stakes at each frame support is required for proper support of the shelter.
ATTENTION: Use the 6' straps (with ratchets) for the 9' and 2' tall storage bags/shelters.
STEP : Remove the protective plastic sleeve.
STEP 2: At each frame support pipe, measure at least
three feet (3') in the desired direction and twist a
ground stake into the ground.
STEP 3: Twist stake clockwise until triangular top
touches the ground.
STEP 4: Hook the attached S-Hook in the eye of the
eyebolt assembly.
STEP 5: Insert the loose end of long strap into the
ratchet and tighten to keep strap in place.
STEP 6: Hook the remaining S-Hook through the
triangular top of the ground stake and tighten the
ratchet.
NOTE: If the strap
buildup is too great
in the ratchet, loosen
the ratchet, remove
excess strap, and
retighten the ratchet.
DO NOT remove too
much strap.
STEP 7: Repeat the steps as needed to secure each
frame support pipe to a ground stake.
ATTENTION: DO NOT OVERTIGHTEN RATCHETS.
Diagram shows how
to position straps and
ground stakes at each
corner for proper
support.
Storage Bag
Top View
Dashed lines represent ground anchor straps.
