5
Revision date: 02.10.10
REQUIRED TOOLS
The following list identifies the main tools needed to
assemble the shelter. Additional tools and supports may
be needed depending on the structure, location, and
application.
Tape measure or measuring device
•
Marker to mark locations on the pipes and rafters
•
Variable speed drill and impact driver (cordless with
•
extra batteries works best)
Metal-cutting saw or tool to cut cable
•
Wrenches and impact socket set
•
Scissors, utility knife, or tin snips
•
Hammers and gloves
•
Adjustable pliers and self-locking pliers
•
Ladders, work platforms, and other machinery for
•
lifting designed to work safely at the height of the
building
UNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all the
necessary parts before you begin to assemble the shelter
frame.
Unpack the contents of the shipment and place where
1.
you can easily inventory the parts. Refer to the Bill of
Materials/Spec Sheets.
Verify that all parts listed on the Bill of Materials/Spec
2.
Sheets are present. If anything is missing or you have
questions, consult the Pictorial Parts Guide and all
diagrams for clarification, or contact Customer
Service.
NOTE:
At this time, you do not need to open the
plastic bags containing smaller parts such as
fasteners or washers (if equipped).
Important Information
Space below is reserved for customer notes.
