CLEARVIEWACCESSORIES.COM.AU
1
Measure Height & Width
of Your Fridge / Pantry
Assembly of the Fridge Cage Requires
2.5MM Allen Key
Philips Head Screwdriver
Measure the height & width of your
Fridge / Pantry. If fridge has insulation,
ensure that the measurements are
taken with that in consideration
2
Attach Top Side Panels to
Roof Panel
Using the 2.5MM Hex Head screws,
attach the Top Side Panels to the
Roof Panel (
3A-3B to 6
)
Note: Be careful when screwing in
panels with the Hex Head screws.
Screw holes are pre-drilled in
aluminum frame and forcing a screw
into the thread will strip out the
tapping
3
Attach Back Top Panel to
Back Bottom Panel
Taking into consideration the height of
your fridge/pantry, use hex head
screws to attach back top panel to
back bottom panel (
4 to 5
)
