3.2.3 Step 2: Adjust Transport Stream Settings
Click on
SETUP
then on
SETUP/TS
:
Set your
TS settings
for each channel then press
Save Settings
at the left-hand side.
Once you have set all parameters and pressed Save Settings, finally press
Save Setting and Reboot System
to store permanently. The Bitrate setting must not exceed
The allowable amount according to your modulator parameter settings. Please use the
Chart below to determine the maximum bitrate value.
CR
GI
QPSK
16QAM
64QAM
1/2
1/32
4.486
8.972
13.458
1/16
4.354
8.708
13.062
1/8
4.112
8.224
12.336
1/4
3.701
7.401
11.103
2/3
1/32
5.981
11.962
17.945
1/16
5.805
11.611
17.414
1/8
5.483
10.965
16.449
1/4
4.934
9.869
14.804
3/4
1/32
6.729
13.458
20.188
1/16
6.531
13.062
19.594
1/8
6.168
12.336
18.506
1/4
5.551
11.103
16.654
5/6
1/32
7.477
14.954
22.431
1/16
7.257
14.514
21.771
1/8
6.854
13.707
20.562
1/4
6.168
12.336
18.506
7/8
1/32
7.851
15.702
23.552
1/16
7.620
15.239
22.859
1/8
7.196
14.393
21.590
1/4
6.477
12.954
19.431