Figure-6
Here by clicking “Add”, users can set the program NIT in its respective field.
After setting all the data, users need to click on “Save”
to save the setting.
IP Output
Click “IP Output” from the left menu, it will display the screen as Figure-7 where to
configure the output IP.
After setting the parameters, click “Apply” to save the setting.
Figure-7
This device is with 2 MPTS (or 4
SPTS) IP output. The 2 (or 4) boxes
represent respectively IP Channel.
Click the related box(es) to enable
the corresponding channel(s) to
output programs.
To
configure
the
output IP address and
ports
for
the
IP
Channels respectively.
Sd4260
S-Video/CVBS/YPbPr to DVB-T Encoder Modulator User Manual
Page 19