Modulator Setting
Enter in “Modulator” and it will display the Modulator Configuration screen as Figure-8
where can set modulation parameters.
RF On
–To decide whether to enable the RF (carrier A/B) output or not.
ASI Output
– To select carrier output channel for ASI output (
Output A:
The ASI output
programs are same as carrier A;
Output B:
The ASI output programs are same as carrier
B.)
After setting all the parameters, click “Apply”
to save the Modulator Configuration.
Figure-8
Save/Restore
Clicking “Save/Restore” from the menu, it will display the screen as Figure-9 where can
save the configuration permanently to the device. Click “Save Configuration”, for store the
data permanently to the device.
By using “Restore Configuration” user can restore the latest saved configuration to the
device.
By using “Factory Set” user can import the default factory configuration.
To choose ASI output programs,
as a mirror of one carrier.
SD4260
S-Video/CVBS/YPbPr to DVB-T Encoder Modulator User Manual
Page 20
