91b_1_5 en bedingt.fm, 10.09.2010
P1890E/EN 2010-08
11
Product description
3
2.3
Storage
For short-term storage and for protection against damage:
➔
Place the 17BP in the tool holder.
For storage longer than 100 hours:
➔
Disconnect battery from the 17BP.
The battery is discharged by the electronics integrated in the tool.
3
Product description
3.1
General description
•
Sturdy, brushless motor with resolver.
Shutoff is torque/angle-controlled.
•
LCD display with information on status, torque and angle.
•
Green OK and red NOK LED display provides information
on the current fastening result.
•
LED lighting makes it possible to find the screw point quickly.
•
Clockwise/counterclockwise rotation
•
Low vibration level
•
Servo and fastening electronics are integrated in the 17BP.
•
Fastening parameters are set with the controller or to a computer.
•
Data is transmitted between the controller and tool via
-
infrared (IrDA)
Parameters and rundown results are transmitted to the control or to a computer simply by placing the
17BP in the tool holder.
-
868 MHz
-
WLAN (IEEE 802.11b/g)
-
RF15.4 (IEEE 802.15.4).
•
Power supply via
-
Akkupack 26 V / 44 V
-
Power Modul 48 V
•
Built-in acoustic signal. The signal is activated after barcodes are scanned. It can also be activated after
NOK rundowns for a programmable time.
Object
Time period
Storage temperature
17BP
without PS
No guideline
-25 °C to +40 °C (-13 to 104 °F)
Summary of Contents for 17BP B
Page 4: ...4 P1890E EN 2010 08 90a_ Deckblatt en fm 10 09 2010...
Page 20: ...20 P1890E EN 2010 08 91b_1_5 en bedingt fm 10 09 2010 First Operation 6...
Page 48: ...48 P1890E EN 2010 08 91e_Trouble shooting en bedingt fm 10 09 2010 Troubleshooting 9...
Page 54: ...54 P1890E EN 2010 08 90e_Ersatzteile en fm 10 09 2010 Spare parts 10...
