6
P2055MA | 2019-09
Apex Tool Group
EN
2.5 Personal Protective Equipment
The motor may heat up and cause burns during removal.
(max. engine temperature 80 °C).
Wear gloves, if you need to touch the motor.
When working with rotating parts, it is not permitted to
wear gloves.
Recommendation: Freely rotating
u-GUARD
pro-
tected fastening tools are available from APEX.
Wear close-fitting clothing.
Wear safety shoes.
If necessary, wear a hairnet.
Wear protective goggles, if there is a risk of flying
debris or parts being elected.
2.6 Warnings and Notes
Warning notes are identified by a signal word and picto-
gram:
•
Signal word: describes the severity and the probability
of the impending danger.
•
Pictogram: describes the type of danger.
Structure Of Warnings
2.7 Symbols on the Product
Be sure to understand the meaning of each symbol below
prior to installation, operation or maintenance service.
2.8 Principles of safe working
Work area
Close all safety devices.
Ensure that there is enough space in the work area.
Keep the work area clean.
Electric security
High leakage current – Fatal electric shock could occur.
Always disconnect the power supply before unplug-
ging the connectors.
Always disconnect the cable from the controller or
Spindle before making throughput, resistance and
short circuit measurements.
Do not attempt to repair possible faults on the fasten-
ing system by yourself if you do not have the required
knowledge! Inform the local repair center or your
Sales
& Service Centers
.
Hazards from ejected parts
Components of the spindle may rotate, come loose
and cause injury.
Avoid speed increases of over 328 ft/s² (100 m/s²) on
all axes.
Observe the tightening torque of the union nut.
Danger
Symbol combined with the word
Danger
in-
dicates a hazard with a
high level of risk
which, if not avoided, will result in death or
serious injury.
Warning
Symbol combined with the word
Warning
indicates a hazard with a
medium level of
risk
which, if not avoided, could result in
death or serious injury.
Caution
Symbol combined with the word
Caution
in-
dicates a hazard with a
low level of risk
which, if not avoided, could result in minor or
moderate injuries or environmental dam-
age.
Note
An symbol combined with the word
Note
in-
dicates a potentially harmful situation which,
if not avoided, could result in damage to
property or the environment.
General notes includes application tips
and useful information, but no hazard
warnings.
Caution
Type and source of danger.
Possible consequences of non-obser-
vance.
Measures to avoid danger.
Electrical voltage
Hot surface
Read all instructions.
Observe the local disposal guidelines for
all components of this device and its pack-
aging.
Summary of Contents for BB P2055MA
