Cleco BB P2055MA, Assembly Instructions Manual

7

P2055MA | 2019-09

Apex Tool Group

EN

Careful handling and use of tools



Always disconnect the power supply before changing 
screw bits.



Inspect screw bits and retaining ring for visible damage 
and cracks. 



Replace damaged parts immediately.



Only use screw bits for machine-controlled fastening 
tools.



Make sure that the screw bits are retained securely.

Danger due to incorrect TQ measurement.

An undetected NOK tightening could have life-threatening 
consequences.



Recalibration (or capability analysis) is essential fol-
lowing incorrect use (crash, mechanical overload…).



For category A tightenings (VDI 2862) which are criti-
cal for safety, activate a redundancy measurement 
(e.g. current redundancy).



Introduce regular monitoring of measuring equipment 
on the machines.



Do not use defective systems. If in doubt, contact 

Sales & Service Centers

.

3

Transport



Transport only in the original packing.

If the package is damaged, check the part for visible dam-
age. 



Inform the carrier or 

Sales & Service Centers

, if neces-

sary