Menus and Functions
30
P2398PM |
2019-12
Apex Tool Group
3
EN
Entering a PIN
Fig. 3-21: Submenu – Entering a PIN
If a PIN is activated, a lock symbol appears in the header and on the respective menu. The number on the
lock symbol in the header
indicates the current access level. If a PIN for a higher access level is
required to open a menu, then a lock symbol is also displayed on the respective menu. To open these
menus, a PIN must be entered.
A PIN consists of four numbers. To enter a PIN:
1. Enter four numbers. The number on the lock indicates which PIN must be entered.
-
Use the
and
buttons to increase/decrease the numbers between 0 and 9.
-
Use the
and
buttons to switch between the four input boxes.
2. Confirm the PIN with the
button.
→
The PIN is highlighted in green: PIN is correct
→
The PIN is highlighted in red: PIN is incorrect
After unlocking, the tool will lock again if no action is taken for two minutes or if a switch is made to the run
screen.
Changing a PIN
>
>
>
Fig. 3-22: Submenu – Changing a PIN
1 0 0 0
Old
New
1 0 0 0
- - - -
Summary of Contents for CellCore CCBA
Page 65: ......
