Menus And Functions
36
P2398PM | 2022-07
Apex Tool Group
3
EN
>
Fig. 3-26: Submenu Angle test
To start the tests, keep the start trigger pressed.
Symbol
Description
Display of the shut-off angle of 360°.
Display of the angle.
The displayed angle should be close to 360°.
3.8.3
Torque test
With the torque test, the functionality of the measuring sensor can be checked, and the torque measure-
ment can be evaluated.
At the beginning of the test, the torque is 0 Nm. Throughout the entire test, the torque is measured and dis-
played.
>
Fig. 3-27: Submenu Torque test
To start the tests, keep the start trigger pressed.
