57
58
Figure 79
Figure 81
Figure 80
Figure 80a
Step 1
Loosen Top Tether belt by pressing adjuster
release button while pulling strap as shown
in
Figure 79
.
Step 2
Pull in and hold retention spring on hook,
then remove hook from Tether Anchor as
shown in
Figure 80
and
80a
.
Step 3
Loosen UAS Belt by pressing the adjuster
button and pulling out on UAS Belt as shown
in
Figure 81
.
• Pressing down in center of car seat to
reduce tension on UAS Belt will make it
easier to loosen UAS Belt.
Removing Forward-Facing Car Seat Installed With UAS
Figure 59
Figure 60b
Step 4
Remove each UAS Push-on Connector from
vehicle lower anchors by pressing and
holding the red release button while pulling
the UAS push-on Connector as shown in
Figure 82
.
Step 5
Remove car seat from vehicle.
Step 6
Remove UAS Belt from Forward-Facing belt
path and store UAS belt. See “UAS Belt
Storage” on page 76.
Step 7:
Store top tether. See “Top Tether Storage” on
page 78.
Figure 82
