Step 4
Check that Q-Tether Adjuster
is connected to side of Splitter
Plate closest to where child will
be loaded and unloaded.
Option 1:
If Q-Tether Adjuster
needs to be moved to other
side of Splitter Plate:
• Remove loop at each
end of Q-Tether Strap
from Splitter Plate
by sliding strap out
through slot in Splitter
Plate as shown in
Figure 7.
• Position Q-Tether
Strap so that Adjuster
is located on side of
Splitter Plate closest
to where child will be
loaded and unloaded.
Figure 7
Summary of Contents for Q-Tether
Page 1: ...Foonf Fllo Q Tether Manual ...
Page 16: ......
