MAINTENANCE
GIAMPY
Rev. 00
15/02/2012
Pag. 35/43
5. MAINTENANCE
5.1. MAINTENANCE TABLE
To keep a good efficiency of this autoscrubber machine and grant a good reliability during the warranty
period, is essential to keep a periodic maintenance using the table reported in this manual.
•
Authorized personnel only can service this machine, particularly for electrical and
electromechanical parts using suitable tools and equipment for every intervention
•
For assistance and spare parts address exclusively to Fiorentini S.r.l.
OPERATIONS TO BE MADE
INTERVENTION MODALITY
FREQUENCY
Cleaning p
Clean up the recovery tank and suction motor filter
Every day
•
Never use corrosives.
•
Don’t use water jets.
Check suction and squeegee pipes cleaning up
Weekly
Controls
Check the state of the suction blades and of
the squeegee rubber
Check battery water level
Every 15 days
Check solution tank filter
Every month
Check brake system
Every 3 months
Check battery cables fixing up
Every 6 months
Check the state of each motor brushes
Every year
Check safety devices
Check electric system
Every year
5.2 BATTERY MAINTENANCE
Control of battery charge can be easily made when the operator is working with the machine through the
indicator placed on the control bridge. It shows the following information :
On green : the battery is charged
On yellow : the battery is half-charged
On red : the battery is flat
During charging don’t let the battery box opened
Don’t use fire and no smoke nearby the batteries
Take care to the liquid because corrosive
Don’t sparkle close to the batteries
Battery gas is explosive
Never invert the polarity
