STARTING AND USE INSTRUCTIONS
Ecosmart
Rev. 000
29/11/2012
18/38
4. STARTING AND USE INSTRUCTIONS
4.1. TRANSPORT AND HANDLING
The machine is delivered to the purchaser in a proper package (see picture 4.1 below). A black arrow on the
package indicates the barycentre. This arrow must be in the middle of the elevator or transpallet forks. The
package must be carefully handled. Do not place one package on another one. If agreed with the purchaser,
the machine can be delivered without package, placed on a pallet and fixed by means of straps.
The purchaser must make sure that the machine has not been damaged during the
transport and that all papers are on the machine. Otherwise, the purchaser must
immediately contact FIORENTINI in order to sort out the problem.
The purchaser is responsible for the transport of the machine if not differently agreed with
FIORENTINI..
The handling and must be carried out with apparatus and means of lifting gear, as reported in the following
table. Always ensure that the forks of the elevator, or bands of the harness, are always positioned so that the
black arrow, drawn on the packaging, is always placed in the center of the lifting system prepared. The
anchorage points and / or harness are arranged in such a way that during lifting the machine remains stably
in position of equilibrium.
PACKAGE
HANDLING EQUIPMENT
PICTU
RE
Paperboard or plywood box on
a pallet
Fork elevator
Nr. 4.2.
None
Fork elevator or crane truck with a two-band-sling and equalizer Nr. 4.3.
PICTURE 4.1
