MACHINE FEATURES AND TECHNICAL DATA
Ecosmart
Rev. 000
29/11/2012
7/38
2.
MACHINE FEATURES AND TECHNICAL DATA
2.1. IDENTIFYING THE MACHINE
A silver label is sticked on the protection case of the steering column and clearly shows the data referring to
the “CE” marking.
The label has never to be removed and should always be kept readable. In case of
damage it is necessary to ask for a duplicate. The autoscrubber machine cannot be sold
without the label.
2.2. DESCRIPTION AND COMPONENTS
The scrubber machine Ecosmart has been designed for the cleaning of all flat surfaces by means of washing
and suction of the washing water.
The electric traction system is supplied by a series of batteries which supply energy to the brushes motors, to
the squeegee motor and to the suction motor..
The machine is equipped with two brushes or one brush which wash the surface by means of water and
detergent. Whilst the machine is running forward, the back brush (squeegee) picks the water up that is
directly sucked into the recovery tank.
By means of the ignition key (see part.8 Fig.4.6), the machine is prepared for the washing and drying of the
floor and with the forward preset; if ripreme returns to the initial situation.
.
The control panel controls all functions of the machine and provides a means of indicating to the operator,
through the use of LEDs and a display, provides a comprehensive overview of the activities' functioning
during washing. Through the control panel you can implement all the main functions of the machine. In
particular, you can:
start the washing machine in operation;
adjust the speed of advancement;
adjust the suction power;
determine the forward or backward;
display the battery charge;
lower the plate brushes and boot brushes;
start the vacuum;
turn on and off the machine;
PICTURE N° 2.1
