Using the machine:
LOGIC FOR NORMAL USE
Turn on the Main switch on body
Turn on ON/OFF button on lance control panel
Fluid in boiler will start to heat and heating indicator light will
fl
ush.
Andpumpwillautomaticswitch-overtolowspeed
After about 20 seconds,
the fl
uid will be heated to steam
and steam will come out from brush of lance
Change the L/H selector button for pump speed.
Andyoucangetless/moresteam.
Place the brush on the piece of
fl
attened gum, Agitate the
fl
attened
gum with the brush until you see it disintegrate by using circular
motions-do not scrub or apply pressure. The weight of the lance with
agitation is all that is required.
Remove the lance from the gum and use a broom to sweep across
the area to ensure the gum has been destroyed or if further cleaning
is needed.
As gum deposits are all different there will be varying times taken to
destroy each piece.
Turning OFF the machine:
Turn off ON/OFF button
on lance control panel.
Turn off the Main
switch on the body.
Open the drawer and take out
the batteries from battery housing.
Charge for batteries.
1
2
3
4
Place the lance to holder of body.
Insert the broom to broom holder of body.
5
(DO NOT press Rinse button to wait for 1 minute)
11
The steam will come out from the hole of brush, and the heating indicator will
be bright. After few seconds, the steam temperature will be raised.