OPERATION
21
T12 9009918 (3--2013)
CONVENTIONAL SCRUBBING MODE
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and remove key.
1. Open the solution tank cover.
2. Partially fill solution tank with water (not to
exceed 60
q
C / 140
q
F). Pour the required
amount of detergent into the solution tank.
Continue filling the solution tank with water
until the level is approximately 50 mm (2 in)
below the cap.
WARNING: Flammable materials can
cause an explosion or fire. Do not use
flammable materials in tank(s).
ATTENTION: For Conventional Scrubbing,
only use recommended cleaning detergents.
Machine damage due to improper detergent
usage will void the manufacturer warranty.
NOTE: Pour a recommended foam control
solution into the recovery tank if excessive foam
appears. For specific detergent recommendations,
contact a Tennant representative.
3. Close the solution tank cover.
ec- H2O BUTTON (OPTION)
The
ec--H2O button
enables the
ec--H2O
system
to come on when the
1--STEP button
is activated.
The light between the
ec--H2O
logo and
ec--H2O
button
will come on. The machine will default to
the last setting used when it is powered on or off.
T12
T12XP
