OPERATION
22
T12 9009918 (3--2013)
SETTING BRUSH PRESSURE
Under normal cleaning conditions, the brush
pressure should be set to the lowest setting.
Under heavy grime conditions, the brush pressure
can be set to a higher setting. Travel speed and
floor conditions will affect cleaning performance.
If brushes are worn, it may be necessary to
increase the brush pressure. The machine will
default to the last setting used when it is powered
on or off.
T12 Only:
With the
1--STEP button
activated,
press either the
Brush pressure increase button
(+)
or
Brush pressure decrease button (--)
to set
the brush pressure.
T12
T12XP Only:
With the
1--STEP button
activated,
press the
Brush pressure button
to both raise or
lower the brush pressure settings.
T12XP
SETTING SOLUTION FLOW
With the
1--STEP button
activated, press either
Solution increase button (+)
or
Solution decrease
button (--)
to set the solution flow level. Travel
speed and floor conditions will affect scrubbing
performance. Under normal soilage conditions the
solution flow level should be set to the lowest
setting (the left light). Under heavy grime
conditions, the solution flow level should be set to
the higher settings (middle or right lights). The
machine will default to the last setting used when
the machine is powered on or off. The solution
flow indicator lights display the current solution
flow setting.
T12
T12XP
