MAINTENANCE
62
T12 9009910 (3--2013)
ec- H2O MODULE FLUSH PROCEDURE
This procedure is only required when an alarm
sounds and the
ec--H2O
system indicator light
begins to blink.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface and turn off
machine.
1. Lift the operator seat open and engage the
seat support.
2. Remove the drain hose from the
ec--H2O
compartment.
3. Press the connector button to disconnect the
outlet hose from the
ec--H2O
manifold.
4. Connect the drain hose to the
ec--H2O
manifold hose disconnected from the
ec--H2O
manifold in the previous step.
5. Place the drain hose into a empty container.
6. Pour 2 gallons (7.6 liters) of white or rice
vinegar into the solution tank.
