EN
OPERATION
8
Tennant T2 (07--08)
5. Check the squeegee blades for proper deflection.
The blades should deflect as shown (Figure 5).
FIG. 5
6. To adjust the blade deflection, place the squeegee
assembly on a level surface and adjust the casters
as shown (Figure 6).
4 mm
FIG. 6
7. When transporting or storing machine, remove the
squeegee assembly and hang it on the storage
bracket (Figure 7).
FIG. 7
INSTALLING BRUSHES/PADS
FOR SAFETY: Before installing brushes or pad
drivers, stop machine on level surface, remove key
and set parking brake if equipped.
1. Park the machine on a level surface and remove
key.
2. Step down on the scrub head lift pedal to raise the
scrub head off the floor (Figure 8).
FIG. 8
3. Attach the pad to the pad driver and secure pad
with centerlock (Figure 9).
FIG. 9
4. Turn the brush motor hub until the slot with the
spring clip is visible through the scrub head
window (Figure 10).
Spring Clip
FIG. 10
