MEDIA RECLAIMER / SEPARATOR
Page 13
© 2005 CLEMCO INDUSTRIES CORP.
•
www.clemcoindustries.com
•
Manual No. 23438
•
Rev. E
8.6.5
A vibrator attached to the reclaimer cone or
media metering valve may help prevent bridging of fine-
mesh media.
8.7
Blockage in Media Hose
8.7.1
Media obstructions. Usually caused when the
media mixture is too rich. Adjust the metering valve air
mixture per Section 5.4.
8.7.2
Wet or damp media. See Section 8.6.
8.7.3
Reclaimer debris screen clogged with debris.
Check screen basket daily.
8.8 Media
Surge
8.8.1
Heavy media flow. Adjust the metering valve air
mixture per Section 5.4.
8.9
Dust not separating from media
8.9.1
Dust collector damper not open enough. Adjust
static pressure per Section 5.1.
8.9.2
Vortex cylinder out of adjustment. Adjust vortex
cylinder per Section 5.2.
8.9.3
Exhauster motor rotating backwards. The motor
should rotate as indicated by the arrow on the exhauster
housing. If it does not rotate in the proper direction,
LOCK OUT AND TAG OUT ELECTRICAL POWER and
switch the motor leads as shown on the motor plate.
Refer to the system’s wiring schematic.
9.0 REPLACEMENT
PARTS
When ordering replacement parts for equipment built
and sold on Job Orders, include the job order number,
stock number, description, and drawing number.
3600 cfm and larger reclaimers are furnished on job
orders; refer to the assembly drawings furnished with
the equipment for replacement parts for those
reclaimers.
9.1 Optional
Accessories
Item Description
Stock
No.
(-)
Manometer kit ........................................... 12528
9.2
Replacement Reclaimer Assemblies
Any reclaimer not listed is normally furnished on job
orders. Refer to the job order manual furnished with the
equipment for the replacement reclaimer assembly.
Item Description
Stock
No.
(-)
Reclaimer body assembly, less exhauster
Suction
type
900
cfm .............................................. 12399
1200
cfm ............................................ 12831
1800
cfm ............................................ 14152
2500
cfm ............................................ 14153
Pressure
type
900 cfm, for 14" blast machine .......... 21193
900 cfm, for 16" blast machine .......... 21252
900 cfm, for 24" blast machine .......... 21823
1200 cfm, for 16" blast machine ........ 22834
1200 cfm, for 24" blast machine ........ 22686
(-)
Reclaimer assembly, w/ exhauster
Suction
type
900
cfm,
2 HP .................................... 12398
1200
cfm,
5 HP .................................. 14204
1800 cfm, 7.5 HP ............................... 14155
2500
cfm,
10 HP ................................ 14154
Pressure
type
900 cfm, for 14" blast machine .......... 21194
900 cfm, for 16" blast machine .......... 21253
(-)
Reclaimer assembly, pull-through
Suction
type
900
cfm .............................................. 21305
1200
cfm ............................................ 21306
1800
cfm ............................................ 21307
Pressure
type
900 cfm, for 16" blast machine .......... 21293
