RADIUS SL PLUS 03.2019 en
23
6.2.11 Drawing cut (trailing position)
With the RADIUS SL PLUS it is possible to limit the forward rotation of the share or the tools to 90 °, 85 °, 45 °
and 40 °. When working with the Driven Disks, the 45 ° setting is essential. With the other tools and shares it is
possible to work in the four different positions.
When using the blade share with no driven auxiliary tool, the 45 ° setting is used to achieve a better earth transport
due to a higher transit speed compared to the 90 ° setting. With the clearing share (CW653.001400 right and
CW653.001500 left) mounted at the end of the blade, at 45 ° an earth transport from the undervine area to the
middle of the row similar to working with a ploughshare can be achieved.
Figure 28 Stop block mounted
Figure 29 Stop block
If you want to bring the blade share in a different position, please loosen the hexagon head screws (Figure 28,
item 1) and move the stop block (item 2) into the required position.
Figure 30 Stop block in 45° setting
1
1
2
