background image

 

2 / 11 

No. 999-1009, Min’an Avenue, Xiang’an                                                                                                                              18/20 Duerdin , 

Xiamen China 361006                                                                                                                                                            Clayton VIC 3168 
Tel: +86-592-5781288                                                                                                                                                  Tel: +61-3-90176688 

Fax: +86-592-5782298                                                                                                                                                Fax: +61-3-90176668 
Email: 

sales@clenergy.com.cn

                                                                                                                  Email: 

sales@clenergy.com.au

 

Website: 

www.clenergy.com.cn

                                                                                                              Website: www.clenergy.com.au 

2. Tools and Components 

       

2.1 Tools 

 

 

 

 

6mm inside 

hexagonal spanner 

Electric tool 

5m tape 

Marking pen 

 

 

 

 

Torque spanner 

string 

Socket spanner 

     

 

Note

  tools in the figure are only used for rack system

not included in supply scope

Consult system installation personnel about electronic part installation tools. 

 

2.2 Components 

Component list 

 

 

 

ER-S-SB/S10 
Support Leg for SolarBase 

ER-BB-SB/900 

Ballast Bar for SolarBase 

EZ-GC-MC40,   

Module Clamp 40 mm 

 

 

 

ER-WD-SB10/17/A3 

Wind Deflector for 

SolarBase 

EZ-GL-B 

Grounding Lug 

 

Summary of Contents for PV-ezRack SolarBase













Reviews: