CLEOPATRA Complete Wellness, User Manual

27

By pressing the Hydro icon on the Cleo Touch, water beams come from the jets that are placed in 

the bath. Then, by pressing Plus or Min, you can control the massage power of the water jets. This 

system has 2 Massage Power Regulators (MKR) with which you can control the massage power of 

both groups of back jets steplessly and independently of each other by turning the MKR. Even if 

you have put the hydro system on full force by pressing the Plus, you can reduce the massage 

power of the back jet groups. If you touch the Interval icon after touching the Hydro icon, the 

system will automatically vary the massage power of the water jets. So before you press the Plus, 

Min or Interval icon, always press the Hydro icon first. With this key you also turn off the system.

You can only turn on the spa system or just the hydro system or both. If you use the massage power 

regulator (MKR) to allow water from the bottom and the hydro system is at full power and the spa 

system is on full power then you have a powerful massage from the bottom.

4.3  Extreme Wellness Back

The combination of the spa and hydro system which also 

allows water massage from the bottom.

The back massage system consists of 2 groups of jets

(small and large water jets). Pressing the Spa icon on the 

Cleo Touch creates large air bubbles from the bottom. 

You can then adjust the air quantity from the bottom jets 

by pressing the Plus or Min icon. If you press the Interval 

icon after pressing the Spa icon, the system 

automatically varies the air quantity. So before you press 

the Plus, Min or Interval icon, always press the Spa icon 

first. With this key you also turn off the system. After the 

bath is empty, the spa system starts up automatically 

after about 20 minutes to empty the air lines.

MKR

5.1  Functioning

For optimal functioning, the bath must be filled with 

water to just below the overflow. You can not turn on 

the whirlpool if the bath is not filled with water.

With the Push & Drop control you turn the system on / 

off. After about 20 minutes, the whirlpool will 

automatically switch off. 

With the O2 system, by pressing the control a water 

flow with thousands of air bubbles is pumped into the 

bath. The water turns from clear to white. Your skin is 

thoroughly cleaned.

hydro

spa

interval

licht

5  O2 wellness whirlpool system