36
10.3 Damages
Damages of to the acrylic surface, such as shallow scratches, can be removed by using a polishing
paste. Deep scratches can be reduced by rubbing. Make sure that you do not rub through the
acrylic layer.
If in doubt, please contact your supplier who can inform you at all times about the correct
treatment.
10.4 Cleaning Whirlpool system
We advise you to use a Cleopatra Whirlpool cleaner. This cleaner can be found on www.cleopatra.
nl.
If you have any questions after reading this manual, consult your installer.
10.1 Maintenance surface
Acrylic products are easy to clean and maintain. Little dirt remains on the smooth surface. Rinse the
bath with (cold) water after each session and dry it with a cloth. For daily care, a soft sponge or
cloth is recommended with a few drops of antistatic detergent.
Strong pollution can be treated with the Cleopatra Whirlpool cleaner (art 22165340).
Abrasives must not be used under any circumstances!
10.2 Lime stains
Remove lime stains with a not too strong descaler. Rinse with clean water, then rub the surface with
a cloth so that the acrylic regains its original gloss. Do not use acidic cleaning agents or vinegar
cleaners. Damage caused by improper handling is not covered by the warranty.
10 Cleaning and maintenance
Summary of Contents for Complete Wellness
Page 19: ...19 User manual...
Page 37: ......
