36
English
Installation Instructions
Important:
Check product for transport damage before
installation!
Transport damage or surface defects will not
be accepted after installation of the product!
Please assure before installation:
1. The fl oor's carrying capacity must corre-
spond to a load of 300 kg/m².
2. The fl oor must be suffi ciently leveled, i.e. it
must be horizontal and even.
3. Flush the water supply circuits according to
local regulations before installing.
4. Possition service hatches (min. 600 x 600
mm). Position service hatches so that parts
such as blowers, pumps, valves, connector
boxes and other connections and the water
supply are always accessible and replace-
able. Removable side panels are ideal, for
more information please ask your local dea-
ler for Cleopatra.
5. An air grid (only for whirlpool with air sys-
tem) min. 150 cm² is mandatory. The air
grid can be located in a neighbouring room.
The air supply will be guaranteed without
separat air gird if side panels for whirlpools
were used.
Danger!
General:
•
The main switch must be set to "OFF"
during cleaning and maintenance works.
•
Maintenance and adjustment works must
be carried out by experts only.
•
All service covers must be appropriately re-
installed after maintenance works.
•
Any installed safety provisions or safety
equipment may not be modifi ed or
removed.
Note:
The whirlpool’s construction must not be
changed. Only original components may be
used.
Important:
Exafi ll
Caution! According to DIN EN 12764, a sui-
table safety device preventing backfl ow has to
be installed by the customer. According to EN
1717 this must at least consist of a HP safety
combination or according to DIN 1988 of a
pipe interrupter A1 at the respectively correct
installation height.
The bath inlet function is sealed off at the facto-
ry when the bath rim option is not fitted
.
ATTENTION!
Do not use silicone containing acetic acid!
Acrylic or metal parts of the whirlpool can be
damaged by the use of silicone containing
acetic acid.
For the fl exible seals between the elements we
advise to use schimmelwerende silicone kit.
Despite this, and dependant on circumstances,
colorchanges in the kit can happen. If cleaning
does not bring the wanted result, the seals
have to be exchanged. Renewing is not within
our warranty.
The tub must be cleaned thoroughly with
the handshower befor using or testing the
whirlpool functions!
Perform and record leak and commissioning
test according to EN 12764.
Optional Accessories
Hand grip #21940XXX for safe entry into the
whirlpool.
Summary of Contents for Luxusline Duo Imaza 750
