background image

WARNING:

USE ONLY MANUFACTURER’S REPLACEMENT PARTS. USE OF ANY OTHER PARTS COULD 
CAUSE INJURY OR DEATH. REPLACEMENT PARTS ARE ONLY AVAILABLE DIRECT FROM THE 
FACTORY AND MUST BE INSTALLED BY A QUALIFIED SERVICE AGENCY.

PARTS ORDERING INFORMATION:

PURCHASING:

 

ACCESSORIES MAY BE PURCHASED AT ANY

 CLEVELAND IRON WORKS 

LOCAL DEALER OR DIRECT FROM THE F

ACTORY

FOR INFORMATION REGARDING SERVICE:

Please call Toll-Free 1-800-251-0001 • CLEVELAND-IRONWORKS.COM
Our office hours are 8:00 AM – 5:00 PM, EST, Monday through Friday.

Please include the model number, date of purchase, and description of problem in all communi-
cation.

LIMITED WARRANTY:

The company warrants this product to be free from imperfections in material or workmanship, 
under normal and proper use in accordance with instructions of The Company, for a period of 
1 year from the date of delivery to the buyer. The Company, at its option, will repair or replace 
products returned by the buyer to t

he factory, transportation prepaid within said one year peri-

od and found by the Company to have imperfections in material or workmanship.

If a part is damaged or missing, call our Technical Support Department at 1-800-251-0001.

Address any Warranty Claims to the Service Department, Cleveland Ironworks, Inc., 4560 W. 
160TH ST., CLEVELAND, OHIO 44135. Include your name, address and telephone number and 
include details concerning the claim. Also, supply us with the purchase date and the name and 
address of the dealer from whom you purchased our product.

The foregoing is the full extent of the responsibility of the Company. There are no other war-
ranties, express or implied. Specifically there is no warranty of fitness for a particular 

purpose 

and there is no warranty of merchantability. In no event shall the Company be liable for delay 
caused by imperfections, for consequential damages, or for any charges of the expense of any 
nature incurred without its written consent. The cost of repair or replacement shall be the ex-
clusive remedy for any breach of warranty. There is no warranty against infringement of the like 
and no implied warranty arising from course of dealing or usage of trade. This warranty will not 
apply to any product which has been repaired or altered outside of the factory in any respect 
which in our judgment affects its condition or operation.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so 
the above limitation or exclusion may not apply to you. This Warranty gives you specific legal 
rights, and you may have other rights which vary from state to state.

Cleveland Ironworks Inc. reserves the right to make changes at any time, without notice or 
obligation, in colors, specifications, accessories, materials and models.

Cleveland Ironworks Inc., 4560 W. 160TH ST., CLEVELAND, OHIO 44135 • 1-800-251-0001
Cleveland Ironworks Inc., is a registered trademarks of Mr. Heater, Inc.
© 2018, Cleveland Ironworks. All rights reserved

OPERATING INSTRUCTIONS 

AND OWNER’S MANUAL

Model #

Single F500300

Double F500305

READ INSTRUCTIONS CAREFULLY:

 YOUR SAFETY IS IMPORTANT TO YOU AND TO OTHERS. Read and 

follow all instructions. Place instructions in a safe place for future reference. Do not allow anyone who has 
not read these instructions to assemble, light, adjust or operate the stove.

Summary of Contents for Single F500300

Page 1: ...n the vicinity of this appliance WARNING The stove must be 36 from combustible walls wood or plaster board at rear or sides Clearances may be reduced to 4 if the wall construction is entirely non combustible such as concrete or masonry NOT FOR USE ON COMBUSTIBLE FLOORING SAFETY PRECAUTIONS 1 Not for use in Mobile Homes 2 This stove may only be installed outside of any home NOT FOR INDOOR RESIDENTI...

Page 2: ...f barrel by the same process as the door Mark the inner perimeter Use either a hacksaw or a sabre saw to cut along the marking Use high temperature sealant along the cut Press the flue collar into the high temperature sealant against the opening Secure the flue collar with the 6 included bolts Figure 4 For single barrel stoves kit F500300 10 Attach the flue damper to the flue collar Figure 8 For d...

Page 3: ...ark holes for bolt clearance and trace inner diameter of flue collar Remove collar to drill or cut holes Apply high temperature sealant and fasten the door to barrel with bolts and nuts Apply high temperature sealant around the cut openings Figure 5 Center legs on top of barrel Mark then drill holes for bolt clearance Open door to access back of barrel Attach legs to barrel with bolts and nuts Add...

Page 4: ...esponsibility of the Company There are no other war ranties express or implied Specifically there is no warranty of fitness for a particular purpose and there is no warranty of merchantability In no event shall the Company be liable for delay caused by imperfections for consequential damages or for any charges of the expense of any nature incurred without its written consent The cost of repair or ...

Reviews: