Lay out the
groundsheet (A)
on
a flat even surface, making sure
it is clear of any sharp objects.
Unpack your CleverSpa
®
from
its bag and position it in the
middle of the groundsheet.
For first use, remove
the protective plastic from
all of the connectors.
Unscrew the cap from the
Air Outlet (J)
.
Firmly push the
Hose (D)
into
the
Inflation Valve (K).
Connect the RCD/GFCI plug into the
wall socket. To switch on, press the
green
‘Reset/on’
button. To switch off
press the yellow
‘Test/off’
button.
IMPORTANT!
Please ensure the yellow
‘Test/off’
is pressed after each use of your spa.
Uncoil the cord and RCD/GFCI
plug, which is located under
the built-in control unit.
Screw Hose (D)
on to the
Air Outlet (J)
.
Fully unfold the CleverSpa
®
,
making sure all sides are as
upright as possible.
Unscrew the outer cap from the
Inflation Valve (K)
. Be sure not to
unscrew the black inner valve.
Connector Locations:
Air Inflation Outlet (J), Inflation
‘In’ Valve (K) and Drainage (L).
J
J
J
D
K
L
K
K
D
Press the
‘Inflate/Bubble’
button on
the control panel to start inflating the
CleverSpa
®
(a red light will appear).
A
06
SETTING UP YOUR CLEVERSPA
®
1
4
7
10
2
5
8
11
3
6
9
12
SS19 6 Person Square CleverSpa IM_AW.indd 6
30/10/2018 15:29