11
MAINTENANCE & REPAIR OF BLACK LABEL CLEVERSPA
®
WATER LEVEL
Water should be filled and maintained between ‘Min’ and ‘Max’ fill lines as indicated on inner wall
of your CleverSpa
®
IMPORTANCE OF WATER TREATMENT
You need to regularly monitor and appropriately treat the water in your CleverSpa
®
using the recommended
chemicals.
PEOPLE WITH THE FOLLOWING TRAITS ARE AT HIGHER RISK INCLUDING:
• Diabetes, lung and heart disease • Smokers and heavy drinkers
• Anyone with an impaired immune system • People suffering from chronic respiratory or kidney disease.
For more information contact your doctor.
WATER, LEGIONNAIRES DISEASE & HOT TUB RASH
Legionnaires’ disease
can be contracted by inhaling small droplets of water (called aerosols), which
are suspended in the air and contain the bacteria. Certain conditions increase the risk of Legionella if:
• Water temperature in all or some parts of the system is between 20-45°C, which is suitable for
growth of the bacteria.
• It is possible for breathable water droplets to be created and water is stored and/or re-circulated.
• There are deposits that can support bacterial growth providing a source of nutrients for the
organism e.g. rust, sludge, scale, organic matter and biofilms (from the body).
Hot tub rash
, or folliculitis, is a skin infection with symptoms including Itchy red spots on the skin or
pus-filled blisters around hair follicles.
To avoid this, ensure your Chlorine and pH levels are checked at least twice per day using test strips -
hot tubs with good disinfectant and pH control are less likely to spread germs.
For more information visit:
clevercompany.com/support/chemical-maintenance
CLEANING YOUR CLEVERSPA
®
Detergent residues, dissolved solids from bathing suits and chemicals will gradually accumulate
in the water. To clean your CleverSpa
®
, use soap and water then rinse thoroughly.
Please note
: do not use hard brushes or abrasive cleaners.
REPAIRING PUNCTURES IN YOUR CLEVERSPA
®
If your CleverSpa
®
is torn/punctured, use repair patches. Completely dry area to be repaired, apply
strong adhesive to repair patch and then cover the damaged area. Smooth the surface to remove
any air bubbles. Leave to dry for 12 hours before using the CleverSpa
®
.
For more information cleaning and repairing your hot tub visit:
clevercompany.com/support/faqs/cleverspa-faqs
