12
CLEANING & STORING AWAY BLACK LABEL CLEVERSPA
®
HOW TO EMPTY YOUR CLEVERSPA
®
1.
Switch off CleverSpa
®
at electrical mains.
2.
Unscrew cap from drainage outlet
(T),
located near pump system
of the CleverSpa
®
. Ensure drainage plug
(K)
is inserted to
prevent unexpected draining.
3.
Remove drainage plug
(K)
from outlet within floor of CleverSpa
®
,
so water can flow out.
4.
Once drained use a sponge to absorb excess water. Switch
CleverSpa
®
on, allowing you to operate air jet function for up
to 20 minutes (one full cycle) to drain water and dry out
pipeline. If not completely dry after first cycle – repeat.
5.
When draining has finished, replace drainage plug
(K)
and drainage outlet cap
(T)
.
6.
Disconnect the pump & heating system and dry thoroughly.
HOW TO DEFLATE YOUR CLEVERSPA
®
1.
Remove
filter cartridge and filter sock.
2.
Locate inflation valve.
3.
Remove valve cap
(W)
by twisting 90° anti-clockwise.
4.
Press inflation valve
(P)
down, twisting 90°
clockwise
to lock in place, releasing air.
5.
Fold away carefully removing as much air as possible
through open valve.
6.
When fully deflated, turn inflation valve
(P)
90°
anti-clockwise to close – button will pop up.
7.
Replace valve cap
(W)
and turn 90° clockwise to lock.
WARNING!
Hot tub is under high pressure.
The air will release quickly,
with force.
(P)
(W)
(T)
STORING YOUR CLEVERSPA
®
Make sure all water is completely drained from the CleverSpa
®
and pump system. This is vital in
extending the life of your CleverSpa
®
. We recommend the use of a wet/dry vacuum to help blow
out/ suck up water from pipes and pump lines. Remove filter cartridge. CleverSpa
®
should be placed
in bag provided and stored in a dry place, raised off floor and away from extreme temperatures.
Please note:
When not in use, store in a place that is dry and a moderate temperature, as subzero
temperatures can severely damage your CleverSpa
®
.
WHEN TO CHANGE YOUR CLEVERSPA® FILTER
Keep your CleverSpa® hot tub clean and safe from contaminants. For optimum
performance, unscrew the filter and rinse with clean water after every use to
remove any small particles and residue. The filter is one of the most important
elements to ensure your CleverSpa® hot tub works effectively.
1.
Remove filter ‘sock’ protective cover (
L
) then remove filter (
G
).
2.
Rinse the filter under a cold tap and reuse. Alternatively, machine wash your
filter (place in a pillowcase) to keep it clean and to maintain its performance.
Replace your old filter with a new one if:
• The filter remains soiled after cleaning
• Holes are visible in the paper
• The paper is noticeably worn
3.
Replace filter ‘sock’ protective cover (
L
) over filter (
G
) and attach to filter connector (
U
)
by turning it clockwise. Do not over tighten, as this may cause a ‘rattling’ noise.
REMEMBER - CHECK YOUR FILTER EVERY DAY!
To help to keep your water clean, check your filter cartridge every day.
To order filters and chemicals for your CleverSpa
®
, please visit: clevercompany.com
FILTER
CARTRIDGE (G)
FILTER PROTECTOR
COVER (L)
