Safety Instructions
02 - 03
Black Label CleverSpa
®
Parts Checklist
05
Before you set up Black Label CleverSpa
®
06 - 07
Setting up Black Label CleverSpa
®
08 - 09
Operating your Black Label CleverSpa
®
/ CleverLink App Setup
10
Maintenance & Repair of Black Label CleverSpa
®
11
Cleaning & Storing away Black Label CleverSpa
®
12
Troubleshooting
13
Returns 14
Warranty
15
02
CONTENTS
SAFETY INSTRUCTIONS - READ CAREFULLY!
When installing and using this electrical equipment, there are basic safety precautions that should always be followed:
•
Appliance should be supplied through a residual current device (RCD/GFCI type) with a rated tripping current
not exceeding 30mA.
• Electric installations should fulfil the requirements of local standards. Earthed appliances must
be permanently connected to fixed wiring.
• Any damage to electrical cable should be replaced by a competent party immediately before further use.
•
RISK OF ELECTRIC SHOCK
. Never operate any external/additional electrical appliance when in the CleverSpa
®
or when your body is wet. Keep electrical appliances away from the CleverSpa
®
.
•
RISK OF ACCIDENTAL DROWNING.
Children are forbidden from using the CleverSpa
®
unless they are supervised
at all times by a responsible adult.
• For health and safety reasons, we do not recommend children under 8 years old use our hot tubs. For children 8
years + we recommend the temperature be set no higher than 37°C.
• When not in use, cover should be fitted and locked to help retain heat. This also prevents unsupervised children
accessing the CleverSpa
®
.
• Shower before using your CleverSpa
®
. Cosmetic products, lotions etc on skin can degrade water quality.
• Do not switch on if there is any possibility that water in the CleverSpa
®
or control system is frozen.
• Pets should be kept away from your CleverSpa
®
at all times.
Can I use an extension lead to power my CleverSpa®?
We
DO NOT
recommend using an extension cable as this can be a fire risk. We suggest using an external mains
socket that is weather proofed, professionally fitted if you do not have one.
Where can I plug in my CleverSpa® hot tub?
Your CleverSpa® hot tub should be plugged into a suitable fixed mains wall power socket wherever possible.
If using an outdoor power socket please ensure that it is suitable for outdoor use and it is the correct size, allowing
the plug to fit flat against the socket. The outdoor socket should feature a weatherproof protective cover.
Ensure that your power socket and its surrounding location is free from damp or condensation.
Check your mains socket and RCD plug to ensure there is no visible damage or standing water before using.
If a plug does not fit flat against the plug socket, the plug has loose wires or the socket is damaged arcing may occur
causing the socket to crack or the plug to melt.
Damp walls or condensation can cause water ingress into a socket, water within an electrical socket can rapidly
increase the current flowing through the circuit, which could cause a short circuit as the fuse is blown.
Short circuits can also cause loss of power due to overloading of the socket and potentially melt the wiring, which
can lead to an electrical fire or irreparable damage to the socket and any appliances connected to it.
