06
BEFORE YOU SET UP BLACK LABEL CLEVERSPA
®
Before setting up your CleverSpa
®
with CleverLink® - find a strong WiFi signal
DISTANCE FROM HOUSE
42
WIFI STRENGTH
STRONG
42
WIFI STRENGTH
FAIR
42
WIFI STRENGTH
WEAK
WIFI STRENGTH
STRONG
If your WiFi signal is poor in the area you are looking to place
your hot tub, you may find some helpful advice on our website.
clevercompany.com
Before setting up outdoors
1. Setup your CleverSpa® on a solid, level, foundation avoiding sharp objects as they could damage the hot tub.
2. Ensure your CleverSpa® hot tub is plugged into an external mains socket, professionally fitted, with weather
proofing. We DO NOT recommend using an extension cable as this can be a fire risk, refer to the safety
instructions on page 2.
3.
DO NOT OVERINFLATE YOUR HOT TUB
- Air space needs to be left inside the wall of the hot tub to
allow for air expansion (during warmer weather) and contraction (during colder weather).
Please do not place your hot tub in direct sunlight. If this advice is ignored, the wall and rim of the
hot tub could bulge during warmer weather as the PVC heats up, putting additional stress on the
internal welds, causing weld failures. In both of these instances, the warranty would be void.
4. During filling, emptying or when in use, water may spill out. Install near to a drainage point capable
of managing the volume of water.
Before setting up indoors
1. Floor must be able to withstand weight of the CleverSpa
®
+ occupants.
2. Floor should be a non-slip, level surface.
3. Before placing your hot tub indoors, ensure suitable drainage is available and can be reached.
Carefully consider the placement of your hot tub before installation.
N.B. CleverLink® is only available on selected CleverSpa® models
