1948886
V1.2
7 October 2021
Clevertest and Clevertest Plus
Refer to the supplementary operation guide supplied with the Product.
Zoneworks, HIVE and DATA Monitored Options
Fittings with part numbers -ZW
, -HV, -DATA
are fitted with Zoneworks communications modules (nodes).
These fittings are monitored using either Powerline Carrier Technology that utilize the power cable to provide
data communication, RF transceiver modules operating in the ISM band or a dedicated data cable to/from
data routers installed on a dedicated data trunk connected to a central Server (can also be connected via
Ethernet/Internet/Fibre). Zoneworks software on the server is used to monitor, coordinate testing and collate
test data from each fitting. Zoneworks Fittings can be commissioned by a single push of the test switch or by
scanning the supplied barcode. The LED Test Switch indicator provides a multifunction indication of the status
of the fitting during testing and normal operation:
Option
State
LED Operation
ZW/HV/DATA Commissioned
LED on Solid (Green)
ZW / DATA
Un-commissioned
Batt plugged-in:
yellow 1s, green 1s
Batt unplugged:
red 1s, off 1s
HV
Un-commissioned
With network connectivity
Batt plugged-in:
yellow 1s, green 1s
Batt unplugged:
red 1s, off 1s
HV
Un-commissioned
Without network connectivity
Batt plugged-in:
yellow250mS, green
250mS, yellow250mS, green250mS, green 1s
Batt unplugged:
red 250mS, off 250mS, red
250mS,off 250mS, off 1s
ZW / DATA
Emergency Light Test In Progress LED flashes at yellow 5s , 0ff 1s
HV
Emergency Light Test In Progress LED flashes at yellow 1s , 0ff 1s
In the case of the DATA version a 2-way “figure 8” cable and terminal block facilitates the connection to the
DATA network via a multi-drop bus (daisy chain connection). For further information of installation of a
Zoneworks system, please refer to the Zoneworks Users Guide and Commissioning Guide (incl. DATA
version)
DALI EM Option
Luminaires with part numbers having
-DALI
are fitted with DALI modules (nodes) that facilitate connection and
integration to 3
rd
Party Lighting Control Systems. Before installing the -DALI luminaire, please confirm that
the Lighting Control System has the capability to monitor DALI Emergency Luminaires. The -DALI fitting will
be addressed and configured into the control system by the Lighting Control System Commissioning
Technicians and not Clevertronics.
State
LED Operation
Commissioned/ Un-commissioned LED on Solid (Green)
Emergency Light Test in progress LED flashes at 1s On (Yellow) & 1s Off
“IDENTIFY COMMAND”
Lamp and Status LED Flash for 30 seconds
A 2-way “figure 8” cable and terminal block facilitates the connection to the DALI network. DALI connections
are marked as Da Da.
Caution:
On many building sites, power circuits may be cut off in an uncontrolled and repetitive basis during
construction. As a result, any Exit & Emergency Units, on these circuits, will have their batteries discharged
or “cycled”. The battery in this fitting has been selected to give excellent long-life performance in a controlled
AS2293 testing environment. Excessive battery cycling will reduce through-life performance and may lead to
premature battery failure. Battery warranty claims, as a result of such abuse, are specifically EXCLUDED
from Clevertronics warranty terms.
Rated Emergency Lumen Output in accordance with AS2293.1 (refer to spacing
tables for installation positions):
Refer to the Technical Label for classification information.
Argonaut PRO Weatherproof Emergency LED Batten
Victoria (Head Office & Manufacturing)
Website:
Queensland
Phone:
+61 7 3442 9700
Fax:
+61 7 3442 9777
South Australia/Northern Territory
Phone:
+61 8 8301 8800
Fax:
+61 8 8351 8286
Western Australia
Phone:
+61 8 9207 0000
Fax:
+61 8 9207 0088
New Zealand
Phone:
+64 800 548 448
Designed in Australia to comply with the requirements
of AS/NZS2293.3: 2018, AS CISPR 15: 2017
Models:
ARGOPRO-1500-xx-yy-zz
Options:
Testing:
Microwave Sensor (HI/LO)
xx = SEN
Manual Test
zz = Blank
DALI Driver
xx = DD
DALI Registered
zz = DALI
Integrated Battery (non-POD)
yy = LP
Zoneworks
zz = ZW
Emergency POD
yy = LPPOD
Zoneworks HIVE
zz = HV
NOTE: Standard product codes with this symbol are enabled with Clevertest Plus capability.
Please refer to the operation guide supplied with the product for details.
Spare Parts:
8002756
PCA:LED Strip ARGOPRO-1500,HT10540-A1,20P16S,4000K
1330072
LED Driver - Tridonic LC 75W 900–1800mA flexC lp EXC
1330151
LED Driver - TCI DC MAXI JOLLY SVM 65 DALI SLIM
(SEN version only)
1330073
LED Driver - Tridonic LCA 75W 900–1800mA one4all lp PRE
(DD version only)
AUM02370050001 Lifelight Pro, Control Only, 530mm, NP, CTP, OWC
1550230
BATT:LP 3.2V 6400mAh.200mm lead.Brkt.
(Non-POD only)
1550050
BATT:LP 3.2V 3200mAh 70mm lead,no BRKT.
(POD only)
Important:
It is illegal for anyone, except for a licensed electrician to install or maintain this product. Before installation,
ensure that the electricity supply has been switched off and isolated. Installation must be carried out in
accordance with the relevant Australian and International Standards.
Note: This luminaire (with reinforced insulation between control/LED terminal and AC Supply) contains non-
user replaceable light source and battery – to be replaced (if required, refer installation instructions for
battery replacement) by the manufacturer or his service agent or a similar qualified person.
