Disassembly
Removing the VGA Card(s) 2 - 11
2.Disassembly
Removing the VGA Card(s)
1. Turn
off
the computer, and turn it over, remove the battery (
) and remove the component bay cover
(
2. The VGA Card(s) will be visible at point
on the mainboard.
3. Remove screws
(
)
.
4. Carefully (a cable is still connected) grip the plastic tag and lift the video card up
off the sockets
-
and
disconnect cable
.
5. Reverse the process to install the new VGA Card.
Figure 7
VGA Card(s)
Removal
a. Locate the heat sink.
b. Remove the screws.
c. Lift the VGA card up off
the sockets and discon-
nect the cable.
Single Video Card
Note that if you are using a
single video card, it must
be inserted in
Slot A
(i.e.
the left sided slot when
viewed from the bottom
with the front of the ma-
chine pointing towards
you).
10. VGA Card(s)
• 4 Screws
1
2
5
10
6
8
9
a.
6
b.
c.
2
3
1
5
4
2
3
5
4
8
7
6
7
8
9
9
10
10
SLOT A
SLOT B
SLOT A
SLOT B
