Disassembly
Removing the Processor 2 - 9
2.Disassembly
Removing the Processor
1. Turn
off
the computer, and turn it over, remove the battery (
) and remove the component bay cover
(
2. The heat sink will be visible at point
on the mainboard
3. Carefully disconnect cables
and
, then remove the screws
-
from the heat sink in the order indicated
(
).
4. Carefully lift the heat sink (
Figure 5c
) up off the computer.
1
2
3
4
8
9
Figure 5
Processor Removal
a. Locate the heat sink.
b. Disconnect the cables
and remove the screws
in the order indicated.
c. Remove the heat sink.
8. Heat Sink
• 5 Screws
7
2
3
4
1
9
a.
b.
c.
6
5
8
