Disassembly
2 - 12 Removing the Wireless LAN Module
2.Disassembly
Removing the Wireless LAN Module
1. Turn
off
the computer, and turn it over, remove the battery (
) and remove the component bay cover
).
2. The wireless LAN module will be visible at point
on the mainboard.
3. Carefully disconnect cable
, then gently pull the two release latches (
-
) on the sides of the module socket.
4. The wireless LAN module (
) will pop-up, and you can remove it.
1
Figure 8
Wireless LAN
Module Removal
a. Locate the WLAN.
b. Disconnect the cable
and pull the release
latches.
c. The WLAN module will
pop up.
d. Remove the Wireless
LAN module.
Note: Make sure you
reconnect the antenna
cable to the “Main”
socket (
).
2
3
4
5
b.
c.
a.
3
2
1
4
d.
5
5.Wireless LAN Module
