Disassembly
Removing the Keyboard 2 - 11
2.Disassembly
Removing the Keyboard
1.
Turn
off
the computer, remove the battery (
page 2 - 5
), and bottom case (
page 2 - 6
).
2.
Open it up with the LCD on a flat surface before pressing at point
&
to release the keyboard module (use the
special eject stick to do this) while releasing the keyboard in the direction of the arrow
as shown (
Figure 7
a
).
3.
Carefully lift the keyboard
up, being careful not to bend the keyboard ribbon cable
. Disconnect the key-
board ribbon cable
from the locking collar socket by using a flat-head screwdriver to pry the locking collar pins
away from the base (
Figure 7b
).
4.
Carefully lift the keyboard
off the computer (
Figure 7c
).
1
2
3
4
5
5
6
4
a.
b.
2
c.
4
5
5
6
4
1
6
3
6
4. Keyboard
Figure 7
Keyboard Removal
a. Eject the keyboard using
a special eject stick to
push the keyboard out
while releasing the key-
board as shown.
b. Lift the keyboard up and
disconnect the keyboard
ribbon cable from the
locking collar socket.
c. Remove the keyboard.
Re-inserting the Key-
board
When re-inserting the
keyboard firstly, align the
keyboard tabs at the bot-
tom of the keyboard with
the slots in the case.
Summary of Contents for N150RF1
Page 1: ...N150RF1 N150RF1 G ...
