Disassembly
2 - 16 Removing and Installing the M.2 SSD Module
2.Disassembly
M.2 SSD Installation Procedure
1.
Place the thermal pad
on the bottom case as shown (
).
2.
Insert the module
in the computer
)
.
3.
Tighten the screw
to secure it in place (
).
1
Figure 10
M.2 SSD Module
Installation
a. Place the thermal pad.
b. Insert the module.
c. Tighten the screw.
2
3
a.
3
2
b.
c.
1
Thermal Pad
Be sure to place the thermal pad’s adhesive side down onto the
mainboard surface.
The thermal pad‘s thickness differ for different M.2 SSD module:
•
For module with chip, use 2.5mm thick thermal pad.
•
For module without chip, use 3.5mm thick thermal pad.
1. Thermal Pad
2. M.2 SSD Module
•
1 Screw
Summary of Contents for N250WU
