Disassembly
2 - 10 Removing the Keyboard
2.Disassembly
Removing the Keyboard
1.
Turn
off
the computer, turn it over to remove the battery (
2.
Remove screws
-
from the bottom case (
).
3.
Open it up with the LCD on a flat surface before pressing at point
to release the keyboard module while releas-
ing the keyboard in the direction of the arrow
as shown (
).
4.
Carefully lift the keyboard
up, being careful not to bend the keyboard ribbon cable
. Disconnect the key-
board ribbon cable from the locking collar socket
).
5.
Carefully lift up the keyboard
off the computer (
).
1
2
3
4
5
6
7
5
b.
c.
a.
7
1
5
6
7
5
2
4
3
d.
5. Keyboard
•
2 Screws
Figure 5
Keyboard Removal
a. Remove the screws.
b. Release the keyboard by
pressing at point
.
c. Disconnect the keyboard
ribbon cable from the
locking collar socket.
d. Remove the keyboard.
3
Summary of Contents for N250WU
